Maximum cutting capacity: Φ100 mm

Cutting disc specifications: φ350×2.5×32 (mm)

Spindle travel: 145 mm

Worktable travel: 300 mm

Spindle lifting stroke: 50 mm upward and downward

Worktable dimensions: 330 × 280 (mm)

Cutting chamber material: stainless steel

Grinding and polishing head speed: 0–150 rpm
Central pressurization, single-point pressurization
Adjustable-height clamp
Three operating status indicator lights
Electric Lifting Grinding and Polishing Head
Dual-button control for raising and lowering the grinding/polishing head—safer operation.
2.1 kW high-power motor
Standard configuration includes a Φ30mm chuck; other specifications are available upon request.

Standard Rockwell test forces: 60/100/150 (kgf)

Superficial Rockwell test forces: 15/30/45 (kgf)

Loading Control: Automatic Application, Holding, and Release of Test Force

Worktable lifting method: handwheel lifting

Maximum specimen height: 330 mm

Distance from the indenter center to the machine wall: 200 mm

Data Output: Built-in Printer, RS232 Interface

Data display method: 8-inch touchscreen

Test force: 10 gf – 1000 gf (8 levels)

Load control: Automatic

Magnification of the reading eyepiece: 100×, 400×

Turret: Automatic

Built-in printer: Yes

Maximum specimen height: 110 mm

Distance from the indentation center to the machine wall: 110 mm

XY coordinate test stage: 100 × 100 (mm)

Test force: 10 gf – 1000 gf

Load control: Automatic

Magnification: 100×, 400×

Turret: Automatic

Hardness reading: automatic measurement by computer

Maximum specimen height: 105 mm

Distance from the indentation center to the machine wall: 110 mm

Automatic test table: 312 x 225 (mm)

Test force: 10 gf – 1000 gf (8 levels)

Test force selection: variable-load knob

Load control: Automatic

Turret: Automatic

Built-in printer: None

Maximum specimen height: 110 mm

Distance from the indentation center to the machine wall: 110 mm

XY coordinate test stage: 100 × 100 (mm)

Test force: 10 gf – 1000 gf (8 levels)

Load control: Automatic

Magnification of the reading eyepiece: 100×, 400×

Turret: Automatic

Built-in printer: None

Maximum specimen height: 110 mm

Distance from the indentation center to the machine wall: 110 mm

XY coordinate test stage: 100 × 100 (mm)

Maximum cutting capacity: 100 mm

Cutting disc specifications: φ350×2.5×32 (mm)

Spindle travel: 145 mm

Worktable travel: 300 mm

Worktable dimensions: 330 × 280 mm

Cutting chamber material: stainless steel

Maximum cutting capacity: Φ100 mm

Cutting disc specifications: φ350×2.5×32 (mm)

Spindle travel: 145 mm

Worktable travel: 300 mm

Worktable dimensions: 330 × 280 mm

Cutting chamber material: stainless steel

Maximum cutting capacity: Φ100 mm

Cutting disc specifications: φ350×2.5×32(mm)

Spindle travel: 145 mm

Worktable travel: 300 mm

Spindle lifting stroke: 50 mm upward and downward

Worktable dimensions: 330 × 280 (mm)

Cutting chamber material: stainless steel

New-energy vehicle companies’ first choice: large cutting machines
Cutting Machine for New Energy Batteries
Specialized cutting machine for irregular and long shafts
1128mm ultra-long worktable
Cutting dimensions: 220 × 110 × 1200 mm
X-axis travel: 300 mm, Y-axis travel: 120 mm
Automatic Cutting Chamber Door
Infrared Safety Light Curtain

Maximum cutting cross-section: 55×55 mm

Cutting disc dimensions: 300×2×32 (mm)
Cutting cooling device

Maximum cutting cross-section: 30×30 mm

Cutting disc dimensions: 250×2×32 (mm)
Cutting cooling device

Maximum cutting diameter: 60 mm
Cutting disc dimensions: 200×1×32 (mm)
Cutting chamber material: stainless steel
Cutting room built-in lighting

Maximum cutting capacity: 1200 x 110 x 200 (mm)

Grinding wheel specifications: 350 x 2.5 x 32 (mm)

Maximum travel distance for automatic cutting: 300 mm

Maximum table travel: 200 mm

Z-axis travel: 120 mm

Worktable dimensions: 1128 x 380 (mm)

Electric cutting cabin door, infrared safety device

The two turntables can be controlled independently and operate in both manual and automatic modes.
Grinding and polishing head speed: 0–150 rpm
Central pressurization, single-point pressurization
Adjustable-height clamp
Three operating status indicator lights
Electric Lifting Grinding and Polishing Head
Dual-button control for raising and lowering the grinding/polishing head—safer operation.
3.1 kW high-power motor
Standard configuration includes a Φ30mm chuck; other specifications are available upon request.

Specimen pressing diameter:

Imperial units: 1 inch, 1.25 inches, 1.5 inches, 2 inches

Metric 25, 30, 40, 50 mm

Number of sample preparation stations: dual-station

Pressurization method: electric hydraulic

Heating temperature: 90°C–200°C

Cooling method: Water-cooled

Maximum cutting diameter: 50 mm
Cutting disc outer diameter: 127–200 mm
Cutting disc inner diameter: 12.7 mm or 25.4 mm
Standard configuration includes six fixtures.
Optional cutting worktable

Maximum cutting height: 50 mm

Cutting disc dimensions: 200×32×1 (mm)

Maximum Y-axis travel: 240mm

Worktable dimensions: 270 × 465 mm (left-right stacking)

Laser tool setter

Maximum cutting capacity: Φ80mm

Cutting disc dimensions: 250×1.5×32 (mm)

Maximum Z-axis travel: 50 mm

Maximum Y-axis travel: 200 mm

Maximum X-axis travel (manual): 50 mm

Cutting chamber material: stainless steel

Maximum cutting diameter: Φ160mm

Cutting disc specifications: 450×3.2×32 (mm)

Maximum Z-axis travel: 220 mm

Maximum Y-axis travel: 200mm 

X-axis Maximum travel distance: 240mm

Cutting chamber dimensions: 1240 × 780 (mm)

Cutting chamber material: stainless steel

Maximum passage diameter: φ185mm

Cutting disc specifications: 508×4×38.1 (mm)

Maximum Z-axis travel: 240 mm

Maximum Y-axis travel: 350 mm

Maximum X-axis travel: 260 mm

Cutting chamber dimensions: 680 × 1030 (mm)

Cutting chamber material: stainless steel

Brinell test force: 15.625 kgf – 187.5 kgf (5 levels)

Vickers test force: 15 kgf – 150 kgf (6 levels)

Vickers test force: 5 kgf – 100 kgf (6 levels)

Loading method: Automatic

Magnification: 37.5×, 75×, 150×

Maximum specimen height: 285 mm – 330 mm

Distance from the indenter center to the machine wall: 200 mm

Standard Rockwell test forces: 60/100/150 (kgf)

Superficial Rockwell test forces: 15/30/45 (kgf)

Loading control: automatic loading, load holding, and unloading

Worktable lifting: manual, electric

Maximum specimen height: 320 mm

Distance from the indenter center to the machine wall: 200 mm

Data output: printer, RS232

Screen specifications: 8-inch touchscreen

Test force: 62.5 kgf – 3000 kgf (8 levels)

Loading method: weights

Reading lens magnification: 20×, 40×

Objective magnification: 1×, 2×

Maximum specimen height: 280 mm

Distance from the indenter center to the machine wall: 175 mm

Test force: 187.5 kgf – 3000 kgf (5 levels)

Loading method: weights

Reading lens magnification: 20×

Maximum specimen height: 230 mm

Distance from the indenter center to the machine wall: 150 mm

Test force: 62.5 kgf – 3000 kgf (10 levels)

Loading method: electric

Maximum specimen height: 210 mm

Distance from the indenter center to the machine wall: 150 mm

Test force: 62.5 kgf – 3000 kgf (10 levels)

Loading method: electric

Reading lens magnification: 20×

Objective magnification: 1×, 2×

Maximum specimen height: 280 mm

Distance from the indenter center to the machine wall: 175 mm

Test force: 31.25 kgf – 3000 kgf (11 levels)

Number of rulers: 14 types

Loading method: electric

Reading lens magnification: 20×, 40×

Measurement modes: manual (two types), automatic

Maximum specimen height: 280 mm

Distance from the indenter center to the machine wall: 175 mm