News
Automatic Grinding and Polishing Machine Manufacturer: What are the main features of grinding and polishing machines?
Release Date:
2022-09-14
Automatic polishing and grinding machine manufacturer: What are the main features of polishing and grinding machines?
1. The polishing machine’s unique LED lighting system in the work area enables operators to observe the specific working conditions more clearly;
2. The durable die-cast aluminum structure is paired with a housing design that has been treated for stain and corrosion resistance;
3. Two loading modes are provided: single-point force loading and central-force loading. Single-point force loading is implemented via pneumatic actuation, while central-force loading utilizes electro-hydraulic vertical actuation, ensuring more precise and reliable loading.
4. The D-shaped grinding disc design makes it more convenient for operators to change the grinding disc and clean the polishing machine’s internal chamber.
5. The grinding and polishing machine features a built-in inner liner in the internal tank, which effectively prevents contaminants from clogging the drain holes and is easy to clean.
6. The internal chamber of the polishing machine is equipped with a base gasket, which facilitates and streamlines cleaning of the base.
7. The flexible tubing design of the grinding and polishing machine’s cooling water system allows the operator to thoroughly clean all components within the polishing machine’s chamber simply by lifting the handle.
8. High-power (torque) system: Ensures the grinding and polishing machine operates safely and reliably even when handling large sample volumes with high hardness, thereby significantly reducing the failure rate.
9. The head and chassis speeds can be continuously adjusted via automatic control, and both offer clockwise and counterclockwise rotation directions.
10. Automatic head-lowering and cut-off positioning settings enable more precise relative positioning of the sample holder and the grinding disc.
11. The prepared samples shall meet the requirements for microscopic analysis (the final polishing shall achieve a surface finish equivalent to that obtained by oxide polishing at 0.02 μm or 0.05 μm).
12. The silent belt drives the grinding wheel, resulting in quieter and more stable operation;
13. The sample rack features a simple clamping design, making installation and removal of the rack more straightforward and convenient, while also enhancing the stability and reliability of operations.
14. The emergency stop button enhances safety, reliability, and convenience during operation;
15. The blue power switch is prominently marked;
16. Simple operation, with excellent applicability and stability (both automatic and manual modes are supported).
How do you disassemble and replace the grinding wheel on a metallographic cutting machine?
1. First, remove the screws securing the cover, then lift the cover off.
2. Insert one wrench into the two flat surfaces of the socket to securely hold it, then insert the other wrench into the nut at the front end of the socket.
3. Before using the automatic metallographic grinding and polishing machine, follow the instruction manual to remove the anchor bolts, place the cutting machine on a stable surface, and then install the inlet and outlet water pipes. Finally, connect the power cable between the water pump and the main unit.
Latest News
Share to
Contact Us
E-mail:weiyi@weiyi.cc
Tel: +86-535-2234728 / 2259938
Fax: +86-535-2215835
Address: Nanfangjia West, Wenfeng Subdistrict, Laizhou City, China
© LaiZhou Weiyi Experimental Machinery Manufacture Co., Ltd. Powered by: www.300.cn SEO